Anti-impact Resin Durable Nylon-like (1kg)

Click here to download the instruction manual

Click here to download the settings

ATTENTION!

Dear Anti-Impact resin users, the Anti-Impact resin batch from June 5th has been upgraded to prevent component precipitation, and the exposure time in the printing setting needs to be increased by 14% compared with the old version, please note the date of manufacture on the label, thank you for your support

Anti-impact resin is a robust, Nylon-like material boasting impressive impact strength and tensile toughness. Its printed objects exhibit exceptional durability, with low water absorption, high dimensional accuracy, and a wear-resistant surface that ensures long-lasting performance. With its stable mechanical properties, excellent fatigue resistance, and weather resistance, this resin is ideal for creating parts that require repeatable machining, wet or underwater operation, impact resistance, snap-on features, or even end-use products.

▌ Attention

• Anti-impact resin liquid has the characteristic smell of acrylate, which is quite pungent. It is recommended to use it in a ventilated environment or on a 3d printer with an air purifier.

• Anti-impact liquid viscosity is relatively high (25 ℃/77 ℉, 700mpa. s), and the stiffness of thin wall or thin diameter structure is not enough, so the printing difficulty is higher than that of standard/rigid resin. 

• Prints will become soft and weak under the following conditions: liquids are stored unsealed after long-term exposure to air (especially in the environment with high humidity); Clean with solvent or ultrasonic for more than 5 minutes. The solution when the prints becomes soft is to place them in thermostatic drying oven at 60-80 ℃ (140-176 ℉) for 30 minutes before post curing. The prints will become harder and more stable.

▌ Reviews

• Youtube: How I mix Resins for my Action Figure 3D Prints | Azrach Toys
• Youtube: M58 & Anti Impact--Nathan Kozuch
• 3D Print BJD Wear Resistant Joints--Helene Holz (Youtube)
• Youtube: RESIONE アンチインパクトレジンは耐衝撃性・靭性・耐摩耗性が優秀 | それつくちゃんねる / SoreTsuku

▌ Descriptions

• High impact strength and tensile toughness
  

• Mechanical properties are similar to nylon and stable for a long time
  

• Low water absorption, low temperature resistance, good weatherability
  

• High dimensional accuracy, fine and wear-resistant surface
  

Anti-impact prints can meet the tolerance requirements of the outer diameter and aperture of the same printed part at the same time, with high dimensional accuracy. And the special formula makes the printing surface smooth and delicate, wear-resistant and scratch resistant.

• Special smell, and not suitable for novices

▌ Cleaning and Post-curing

• Cleaning time: ≤5mins
• Cleaning solvent: 95% Ethanol or IPA
• Post-curing light source: 385-405nm UV(40W)
• Post-curing time: 15mins

▌ Compatible 3D Printer

• All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer

• All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer

▌ Mechanical Properties